Adaptec ANA-62000 - Manual (Page 65)

5-11
Duralink64 Driver Installation for Windows
Installation Tips
This section provides tips to assist you in the DuraLAN driver
installation.
Windows 95
How do I verify that the DuraLAN Standard driver is installed
properly?
1 From the Start menu, point to Settings, then click Control Panel.
2 In the Control Panel, double-click System.
3 In the Device Manager tab, look under Network adapters.
Figure 5-9. The DuraLAN NIC appears under Network adapters
4 The DuraLAN NIC appears under Network Adapters. Click OK.