Adaptec ANA-62000 - Manual (Page 158)

12-2
DuraLAN Fast Ethernet NICs User’s Guide
Installing Novell Client32
DOS
This section provides instructions on installing the ADPTSF 32-bit
driver for Novell Client32 using the ODI driver. Please note that
DuraLAN products do not support 16-bit drivers.
1 Download the latest version of Novell NetWare Client32 via
the Novell web site,
www.novell.com .
2 Start DOS.
3 Insert your Novell NetWare Client32 package.
4 Type install and then press Enter.
5 Follow the instructions on your screen. Please refer to Selecting
Options if you are not sure which option to select.
6 When you are done, you may confirm settings in startnet.bat .
Note: This installation setup assigns settings to one port
only. To assign settings to multiple ports, you must edit
startnet.bat
. See Editing startnet.bat on page 12-4.