Adaptec ANA-62000 - Manual (Page 80)

7-6
DuraLAN Fast Ethernet NICs User’s Guide
Windows NT 3.51
To create Failover pairs, follow these steps:
1 From the Available Adaptec Ports box, click the port you want as the
primary port.
Figure 7-5. Configuration Tab
2 Click Add. The port is added under Primary Port in the Failover Pair
list.
3 To assign a backup to the primary port, click the appropriate port
from the Available Adaptec Ports box, and then click Add. The port
is added in the Backup Port field.
4 Click Apply.
5 O PTIONAL . Repeat steps 1 through 5 to create another Failover pair.
6 O PTIONAL . To remove a Failover pair
a Click the port from the Primary Ports list, and then click Remove.
Both ports return to the Available Adaptec Ports box.
b Click Apply.