Adaptec ANA-62000 - Manual (Page 131)

10-13
Duralink64 Failover for NetWare
Copying and Saving the Configuration
After verifying all port and group configurations, you can install the
program and configuration-related files to the server.
1 From the Main Menu, select Install Software, and then press
Enter
.
2 When the Copy New Files box appears, select Yes, and then
press Enter.
Figure 10-23. Copy New Files Box
3 From the Main Menu, press Esc to exit the program.
4 In the Save Configuration box, select Save and Quit. The
configuration data is saved in
sys:\etc\configsf.ncf .
– If you do not want to not save the changes, select Quit
Without Saving , and then press Enter.
– To return to the Main Menu, select Return to Previous Menu,
and then press Enter.
5 At the system console prompt, type Down and then press
Enter .
6 Type Restart Server , and then press Enter. The server restarts
and opens the Failover Status screen, which must appear
before logging on clients or using the server console.
7 Continue to Viewing the System Status.
Copy New Files?
No
Yes