Adaptec ANA-62000 User Manual
Page 126
10-8
DuraLAN Fast Ethernet NICs User’s Guide
11
O
PTIONAL
.
To rename the default Failover pair name:
a
From the Failover Pair Configuration menu, select Set
Failover Pair Name
, and press Enter.
b
In the Failover Pair Name box, type the pair name, and then
press Enter.
Figure 10-11. Failover Pair Box
Figure 10-12. Pair Name Box
12
To review the ports assigned to the pair, select Display
Existing Ports
from the Set Failover Pairs menu, and then
press Enter.
When you select Display Existing Ports, this box is
displayed as read-only
.
Figure 10-13. Existing Ports Box
13
Press Esc until you return to the Main Menu.
14
To create more pairs, repeat Steps 1 through 13.
15
Continue to Assigning the Protocols.
Pair Name
Failover Pair Name
1
pair1
pair1
List of Existing Pairs
List of Existing
Pair Name
1
Marcom
Marcom
List of Existing Pairs
List of Existing
1. Adptsf1
2. Adptsf2
Existing Ports