Single hub or switch on an ethernet segment, Single hub or switch on an ethernet segment -3, Single hub or switch on an ethernet segmen – Adaptec ANA-62000 User Manual
Page 47
Advertising
4-3
Network Configuration Examples
Single Hub or Switch on an Ethernet
Segment
This configuration uses two NICs connected to a hub or switch on
an Ethernet segment. Duralink64 Failover provides failover
capability if one NIC fails.
Figure 4-2. Single hub or switch on an Ethernet segment
Primary
Backup
Server
Ethernet Switch or
Ethernet Hub
Clients
Advertising
This manual is related to the following products: