Creating the failover pairs, Creating the failover pairs -6 – Adaptec ANA-62000 User Manual
Page 124
10-6
DuraLAN Fast Ethernet NICs User’s Guide
Creating the Failover Pairs
The Failover pair consists of two ports only: the primary port and
the backup port.
1
In the Main Menu, select Set Failover Pairs, and then press
Enter
.
2
In the List of Existing Pairs box, press Ins.
Figure 10-5. List of Existing Pairs Box
3
Select the pair, and then press Enter.
A default pair name uses the
naming convention: first pair= Pair1, second pair=Pair2, third
pair=Pair3, etc.
Figure 10-6. List of Existing Pairs
4
In the Failover Pair Configuration menu, select Add/Remove
Ports
, and then press Enter.
Figure 10-7. Failover Pair Configuration Menu
List of Existing Pairs
No Failover Pairs currently exist
List of Existing Pairs
List of Existin
1. Pair1
List of Existing Pairs
Failover Pair Configuration
List of Existi
Add/Remove Ports
Set Failover Pair Name
Failover Pair Name
Pair1
1. Pair1
Display Existing Ports