Adaptec ANA-62000 - Manual (Page 94)

8-12
DuraLAN Fast Ethernet NICs User’s Guide
3 In the Subnet Mask field, type the subnet mask number.
4 Click Apply.
5 Repeat steps 1 through 4 for any other port or group.
6 Click OK when you are finished configuring all groups.
7 Restart your computer to complete the changes.
8 Click Yes at the message prompt to restart your computer.
9 Continue to Checking System Status on page 8-17.
Once Duralink64 Port Aggregation is installed, you may update
group and port configurations using the instructions in the
Modifying Groups section.