Adaptec ANA-62000 - Manual (Page 149)

11-13
Duralink64 Port Aggregation for NetWare
3 In the List of Protocols box, select the protocol for the current
group/port, and then press Enter.
Figure 11-22. List of Protocols Box
– If you are configuring IPX:
a In the List of Frame Types box, select the frame type,
and then press Enter.
Figure 11-23. Marcom will be bound
with ETHERNET 802.2 .
b In the IPX Network Number box, type a unique IPX
network number, and then press Enter.
Figure 11-24. Example of an IPX network number.
c Repeat steps a and b for each frame type you wish to
use. A check indicates enabled frame types.
Figure 11-25. Marcom and ETHERNET_802.2
are bound.
d Press Esc to return to the List of Protocols box.
List of Protocols
IPX
IP
List of Frame Types
ETHERNET 802.2
ETHERNET 802.3
ETHERNET II
ETHERNET SNAP
IPX Network Number
121212121
List of Frame Types
ETHERNET 802.2
ETHERNET 802.3
ETHERNET II
ETHERNET SNAP