Adaptec ANA-62000 - Manual (Page 160)

12-4
DuraLAN Fast Ethernet NICs User’s Guide
Editing startnet.bat
To assign multiple ports, follow these steps:
1 Load c:\novell\client32\adptsf.lan .
2 In startnet.bat , type slot=[port slot number] at the end of
each line. The following example shows the setting assigned
to port 1:
iomap=1 Frame=ETHERNET_802.2 slot=1
3 For the next port, enter
iomap=1 Frame=[frame type] slot=[port slot number]
To assign multiple frame types, repeat this step changing the
frame type setting.
4 Repeat step 3 for each additional port.
5 Save your changes.
6 Exit startnet.bat .
Connecting Clients to the NetWare Server
Connecting clients to the NetWare Duralink64 server requires the
NDIS driver. Do not use an ODI driver! See the appropriate section:
■
Connecting Clients to the NetWare Failover Server on page 12-6.
■
Installing the NetWare Port Aggregation Driver on page 11-3.