Adaptec ANA-62000 - Manual (Page 169)

A-3
Cables and LEDs
Cable Requirements
Cable requirements for Adaptec DuraLAN NICs vary according to
network speed, cabling standard, and the connector to be used. The
table below identifies appropriate cabling, based on these variables.
The table applies to both Half Duplex and Full Duplex (for selected
models) environments.
NIC Connector 10 Mbps 100 Mbps
Cable
Pins Used
TX Adapters RJ-45 CAT 3,4,5
UTP CAT 5 UTP, 1,2,3, 6
FX Adapters ST N/A 62.5/125
micron
multimode
fiber N/A
SC N/A 62.5/125
micron
multimode
fiber N/A