Adaptec ANA-62000 - Manual (Page 116)

Viewing the Configuration
It is important to verify the current port configurations before saving
them to the server.
1 From the Main Menu, select View Configuration, and press
Enter
.
Figure 9-15. View Configuration Screen
2 Press Esc to return to the Main Menu.
Duralink64 Failover Setup
< F1> Help ©
Netware Loadable Module
Interfaces
<ESC> to go back to the previous menu.
Copyright 1998, Adaptec Inc. < F10> Abort Install
Adptsf3 P
Adptsf4 P
Adptsf5 P
Adptsf6 P
Adptsf7 P
Adptsf8 P
Marcom F
Adptsf1 (Primary)
Adptsf2
Protocol Frame Network IP Address
IPX E_802.2 00000001