Adaptec ANA-62000 - Manual (Page 109)

9-3
Duralink64 Standard Driver for NetWare
Install of Duralink64 Driver during
NetWare 5.0 Operating System
Installation
Follow this procedure when installing the Duralink driver during
the installation of the NetWare 5.0 Operating System.
1 Install the NetWare 5.0 Operating System following the
NetWare instructions until you reach the Network Boards
screen, as shown below.
Figure 9-1. Network Boards Screen
2 Select Modify and press Enter.
3 Select the Network Boards field and press Enter.
4 Press Insert twice.
5 Press F3. The Specify Directory Path Window appears.
Figure 9-2. Device Types Screen
6 Insert the drivers diskette, press Enter.
7 When drivers finish loading return to Driver Summary.
8 Return to the NetWare installation process. Review the
Network Boards screen. Verify that the correct drivers were
installed. Note that one driver will be installed for each port.
9 Continue with the NetWare installation process.