Adaptec ANA-62000 - Manual (Page 134)

10-16
DuraLAN Fast Ethernet NICs User’s Guide
Modifying the Driver Configuration
After installing Duralink64 Failover for NetWare, use configsf to
add, remove, or change a configuration for Adaptec NIC drivers.
You will be familiar with the screens in this program since they are
similar to the ones in fosetsf.
1 At the system console prompt, type load configsf and then
press Enter.
2 In the message screen indicating that ports were
added/removed, press Esc.
3 Refer to Installing the NetWare Failover Driver, page 10-3 for
instructions.