Adaptec ANA-62000 - Manual (Page 140)

11-4
DuraLAN Fast Ethernet NICs User’s Guide
Configuring Ports
1 In the Main Menu, select Configure Ports, and then press Enter.
Figure 11-2. Duralink64 Port Aggregation Setup Main Menu
2 In the Configuration Ports screen, make sure you know which
port names correspond to the actual ports in the server.
Figure 11-3. In this scenario, 2 quad port NICs exist; thus, eight ports are
found. [1] is always the top port of a NIC.
Adaptec DuraLAN NIC Installation 4.2
< F1> Help ©
Netware Loadable Module
Main Menu
Configure Ports
Set Groups
Configure Protocols
View Configuration
Install Software
Uninstall Software
Use arrow keys to move, <Enter> to Select, <ESC> to Exit.
Copyright 1997, Adaptec Inc. < F10> Abort Install
Autodetect (default)
Autodetect (default)
Autodetect (default)
Autodetect (default)
Autodetect (default)
Autodetect (default)
Autodetect (default)
Autodetect (default) Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled 1 Adptsf1
2 Adptsf2
3 Adptsf3
4 Adptsf4
5 Adptsf5
6 Adptsf6
7 Adptsf7
8 Adptsf8
No. Port Name NIC Connection Type Status
ANA-62044/TX:[1]
ANA-62044/TX:[2]
ANA-62044/TX:[3]
ANA-62044/TX:[4]
ANA-62044/TX:[1]
ANA-62044/TX:[2]
ANA-62044/TX:[3]
ANA-62044/TX:[4]