Adaptec ANA-62000 - Manual (Page 42)

3-6
DuraLAN Fast Ethernet NICs User’s Guide
Connecting the Network Cable
Cable requirements for Adaptec DuraLAN NICs vary according to
network speed, cabling standard, and the connector to be used. See
Appendix A, Cables and LEDs for detailed information on cabling.
1 Determine the appropriate cabling for your network.
2 Connect the cable to the NIC connector. (For multiport NICs,
connect a cable to each port.)
3 Connect the other end of the cable to your hub, switch, or
client.
4 Continue with Installing the Appropriate NIC Driver.