Adaptec ANA-62000 - Manual (Page 57)

5-3
Duralink64 Driver Installation for Windows
Installing the DuraLAN Driver
Windows NT 4.0
If you are installing Windows NT at this time, start with step 6 when
prompted for the DuraLAN NIC.
To install the DuraLAN driver on a Windows NT 4.0 platform follow
these steps:
1 Start Windows NT.
2 From the Start menu, point to Settings, and then click Control
Panel.
3 In the Control Panel, double-click Network.
4 In the Network window, click the Adapters tab.
5 In the Adapters tab, click Add.
6 In the Select Network Adapter window, click Have Disk.
Figure 5-1. Select Network Adapter