Agilent Technologies HSSI WanProbe J3916A - Manual (Page 124)

Download New Firmware
Downloading Firmware using a Networked PC and a Terminal
104
Downloading Firmware using a Networked PC and a
Terminal
You can download new firmware to your probe using a networked personal
computer (PC) and a dumb terminal. Before upgrading firmware, you must first
establish an IP connection between your networked PC and the probe.
The following steps are required to download firmware to the probe:
1. “Setup TFTP Server for Downloading”
2. “Download Firmware to the Probe”
Setup TFTP Server for Downloading
Refer to your TFTP application manuals for information on how to setup your
server for downloading a file.
Download Firmware to the Probe
Once your TFTP server is setup for downloading a file, you can download the new
firmware file to the probe.