Agilent Technologies HSSI WanProbe J3916A - Manual (Page 148)

Specifications
128
Probe Memory Allocation
The memory allocated to each parameter depends on how much memory is
installed in the probe. The memory parameter values relate to the various items in
the RMON or the Agilent private MIBs. These parameters were valid at the time
of publication.
Table B-1 shows the memory allocated to each parameter for the available probe
memory configurations. The memory allocation shown for each memory amount
column assumes that all of the available memory within the probe is allocated to
the identified parameter.
NOTE The parameter values shown in Table B-1 are approximate and subject to change
without notice.
Network Statistics and Trace buffers (packet capture buffers) are allocated
dynamically from the same memory allocation. The values shown for Network
Statistics assume that no Trace buffers are configured. If Trace buffers are
configured, the number of Network Statistics are reduced.