Agilent Technologies HSSI WanProbe J3916A - Manual (Page 62)

Installation
42
Installation
This chapter describes how to install the Agilent J3916A HSSI WanProbe.
Installing an Agilent probe consists of the following tasks:
z “Selecting a Location” on page 43
z “Installing the Probe” on page 44
z “Connecting the Probe” on page 49
z “Starting the Probe” on page 67
z “Verifying the Installation” on page 68
If you plan to configure the probe from a local terminal and have not yet done so,
go to “Probe Configuration Using a Local Terminal” on page 17, and perform the
configuration now.