Agilent Technologies HSSI WanProbe J3916A - Manual (Page 52)

Local Terminal Configuration
Using the Main Menu
32
NOTE Selecting Auto to automatically sense the ring speed does not function in all
network installations. If the probe fails to insert into the ring with the Token-Ring
Speed set to Auto, select a fixed speed of 4 or 16 to match your network.
Ring Number Press 7 and then type the local ring number (in decimal) for
your network. Set to -1 for use with ring parameter servers
for automatic setting of the ring number, and set to <x> to
explicitly set the ring number, where x is the ring number in
decimal.
Parameters do not take effect until you select the Save Changes and Exit
menu item.
3. Press S to save the configuration changes and return to the Main Menu.
4. Press 0 to cancel your current changes and return to the Main Menu.