Modify/view configuration values, Modify/view security values, Modify/view interface values – Agilent Technologies HSSI WanProbe J3916A User Manual
Page 126: Display interface summary, Tftp download new firmware, Xmodem download new firmware, Warm start and exit, Cold start and exit, Figure 6-3: probe main menu (networked pc)
Download New Firmware
Downloading Firmware using a Networked PC and a Terminal
106
NOTE
Item 5 in Figure 6-3 is not displayed if the Allow TFTP firmware downloads
menu item is not enabled. Refer to “Modify/View Security Values” on page 24 for
more information on enabling this menu item.
If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.
2. Press
5
to display the Download menu as shown in Figure 6-4.
Main Menu - Revision
1.Modify/View configuration values ->
2.Modify/View security values ->
3.Modify/View interface values ->
4.Display interface summary
5.TFTP Download new firmware ->
6.XMODEM Download new firmware ->
7.Warm start and Exit
8.Cold start and Exit
Figure 6-3: Probe Main Menu (Networked PC)