Agilent Technologies HSSI WanProbe J3916A - Manual (Page 43)

Local Terminal Configuration
Using the Main Menu
23
Date Press 2 and then type the day of the week and then the date in
month/day/year format (mm/dd/yy, through 1999 or
mm/dd/yyyy, starting 2000).
Time Press 3 and then type the time of day in hours, minutes,
seconds (hh:mm:ss) format.
Time Zone Press 4 and then type your time zone in one to 15 characters
(optional).
The Time Zone characters are stored for your convenience
and are used to time-stamp probe information.
NOTE The recommended practice is to use the format of Time Zone, hours from
Greenwich mean time, and then Daylight Saving Time, such as PST8PDT for
Pacific Standard Time (the default). The probe does not automatically update the
Time field when your local time changes between standard time to daylight
savings time.
The values you enter for date and time take effect as soon as you enter them. All
other parameters do not take effect until you select the Save Changes and Exit.
3. Press S to save the configuration changes and return to the Main Menu.
4. Press 0 to cancel your current changes and return to the Main Menu.