Figure 3-12: probe direct connection, Modem connection, Figure 3-12 s – Agilent Technologies HSSI WanProbe J3916A User Manual
Page 80
Advertising
Installation
Connecting the Probe
60
Modem Connection
You can use a modem connection to increase the distance between the probe and
the NetMetrix management station. Perform the following tasks to make a modem
connection between a NetMetrix management station and the probe. Figure 3-13
shows the modem connection to the probe.
z
“Install the Management Station Modem”
z
“Install the Probe’s Modem” on page 62
z
“Configure the Management Station and the Probe” on page 62
Figure 3-12: Probe Direct Connection
Advertising