Agilent Technologies HSSI WanProbe J3916A - Manual (Page 56)

Local Terminal Configuration
Using the Main Menu
36
Display Interface Summary
Use the following procedure to display the Interface Summary screen
(Figure 2-8). This screen lists the Interface, Port Type, and IP Address.
1. On the Main Menu, press 4 , Display Interface Summary. You see the
Display Interface Summary listing Interface, the Port Type, and Port IP
Address.
2. Press Enter to return to the Main Menu.
Modify/View Serial Port Settings
You use the Modify/View Interface Values Menu to view or modify the serial port
settings. Use the following procedure to configure the probe serial port:
1. On the Main Menu, Press 3, Modify/View Interface Values. You see the
Modify/View Interface Values Menu.
Display Interface Summary
Interface Port Type IP Address
---------------- ---------------- ----------------
1.1/Ethernet Telemetry 15.6.72.216
1.2/Serial NA 0.0.0.0
3.1/Frame_Relay Monitor-only NA
3.1/HSSI Monitor-only NA
Figure 2-8: Display Interface Summary