Supported mibs – Agilent Technologies HSSI WanProbe J3916A User Manual
Page 27
Introduction
Probe Overview
7
Supported MIBs
The WanProbe uses SNMP, MIB-II, Agilent private MIB extensions, and selected
RMON MIB groups (groups 3,7,8, and 9) to provide the following features:
z
Alarms
z
Filters
z
Packet Capture
z
Events
z
Log
z
Trap
z
Signaling Layer Statistics
z
Signaling Layer Historical Statistics
z
Frame Relay Protocol Statistics
z
Frame Relay Historical Protocol Statistics
z
PPP* Protocol Statistics
z
PPP* Historical Protocol Statistics
z
Per PVC Frame Relay Protocol Statistics
z
Per PVC Frame Relay Historical Protocol Statistics
z
Per PVC PPP* Protocol Statistics
z
Per PVC PPP* Historical Protocol Statistics
* PPP refers to PPP, HDLC, or SDLC.
The WanProbe implements groups 3, 7, 8, and 9 of RFC 1757,the Remote
Network Monitoring Management Information Base (RMON-1 MIB). Refer to
the RFC for more information.
The WanProbe also implements the Agilent Private MIB, which contains all
WAN statistics and allows for configuration and administration of the probe. It
provides enhanced authentication features, specification of trap destinations,
remote download of new firmware revisions, serial line control, and other
features. The Agilent Private MIB is available electronically with NetMetrix.