Agilent Technologies HSSI WanProbe J3916A - Manual (Page 24)

Introduction
Installation and Configuration Overview
4
Installation and Configuration Overview
To quickly install and configure your probe, it is important for you to understand
the available configuration and installation options. Configuration consists of
setting the probe parameters (IP address, for example). Installation consists of
physically installing the probe and connecting it to the network.
Local Terminal Configuration and Installation
This method of installation and configuration requires that you first configure the
probe and then install the probe. These procedures are detailed in “Local Terminal
Configuration and Installation” on page 4 and “Installation” on page 41.
Installation and Bootp Server Configuration
This method of installation and configuration requires that you first install the
probe and then configure the probe. These procedures are detailed in
“Installation” on page 41 and “Bootp Server Configuration” on page 71.