Agilent Technologies N9340A - Manual (Page 105)

SCPI Command Reference 6
N9340A User’s Guide 103
Control Limit Pattern Testing
:CALCulate:LLINe[1]:PATTern[:STATe]
OFF|ON|0|1
:CALCulate:LLINe[1]:PATTern[:STATe]?
This command toggles the limit pattern testing
between on and off.
If the limit pattern is turned on, limit line is
automatically turned off.
Set Limit Pattern X-axis Units
:CALCulate:LLINe[1]:PATTern:DOMain
FREQ|TIME
:CALCulate:LLINe[1]:PATtern:DOMain?
This command selects how the limit pattern points
are defined: according to frequency, or according to
the sweep time setting of the spectrum analyzer.
The query command returns a string of FREQ or
TIME.
*RST State:
Off
Key Access: [Limit] > {Limit Pattern}
*RST State:
Frequency
Range:
FREQ|TIME
Key Access: [Limit] > {Set pattern} > {X axis unit}