Agilent Technologies N9340A - Manual (Page 19)

Getting Started 2
N9340A User’s Guide 17
Power Requirements
The AC power supply must meet the following
requirements
:
The analyzer is equipped with a three- wire power
cord, in accordance with international safety
standards. This cable grounds the analyzer cabinet
when connected to an appropriate power line
outlet. The cable appropriate to the original
shipping location is included with the analyzer.
Various AC power cables are available that are
unique to specific geographic areas. You can order
additional AC power cables for use in different
areas. The table AC Power Cords lists the available
AC power cables, the plug configurations, and
identifies the geographic area in which each cable
is appropriate.
The detachable power cord is the product
disconnecting device. It disconnects the mains
circuits from the mains supply before other parts
of the product. The front switch is only a standby
switch and do not disconnect instrument from
LINE power.
Voltage: 100 VAC to 240 VAC
Frequency: 50 Hz to 60 Hz
Power: Maximum 62 W