Agilent Technologies N9340A - Manual (Page 113)

SCPI Command Reference 6
N9340A User’s Guide 111
DEMOdulation Subsystem
This sub tree commands are used to control the
demodulation after the measure has been loaded
by
[:SENSe]:FREQuency:SPAN:ZERO
AM Demodulation
:DEMod:AM:STATe OFF|ON|0|1
:DEMod:AM:STATe?
This command toggles AM demodulation function
between off and on.
FM Demodulation
:DEMod:FM:STATe OFF|ON|0|1
:DEMod:FM:STATe?
This command toggles FM demodulation function
between off and on.
*RST State:
Off
Key Access: [Span] > {Demode} > {AM (On)}
*RST State: Off
Key Access:
[Span] > {Demode} > {FM (On)}