Agilent Technologies N9340A - Manual (Page 111)

SCPI Command Reference 6
N9340A User’s Guide 109
Marker to Trace
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe
<integer>
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe?
This command assigns the specified marker to the
designated trace 1, 2, 3 or 4.
Marker X Value
:CALCulate:MARKer[1]|2|3|4|5|6:X <param>
:CALCulate:MARKer[1]|2|3|4|5|6:X?
This command positions the designated marker on
its assigned trace at the specified trace X value.
The value is in the X- axis units (which is often
frequency or time).
The query returns the current X value of the
designated marker.
*RST value:
1
Range:
1 to 4
Key Access: [Marker] > {More} > {Marker Trace}
*RST State:
Matches the units of the trace
on which the marker is
positioned.
Key Access: [Marker] > {Normal}