Agilent Technologies N9340A - Manual (Page 15)

N9340A Overview 1
N9340A User’s Guide 13
Working with Batteries
Use the original battery supplied with the
instrument.
Installing a Battery
Viewing Battery Status
Determine the battery status in either of the
following ways:
• Check the battery icon in the lower right corner
of the front panel screen which indicates the
approximate level of charge.
• Press
[SYS] > {More (1 of 3)} > {Show System} > {Page
down} to check the current battery information.
CAU- CAUTION
Insert a battery with electrodes physically attached
properly.
Step Notes
1 Open the battery cover Use a cross type screwdriver to loose
the screw, then pull the cover open.
2 Insert the battery
3 Close the battery cover Push the cover closed, then
ref-fasten the screw.