Agilent Technologies N9340A - Manual (Page 35)

System Setting 3
N9340A User’s Guide 33
System Setting
Includes general system settings, displayed
language setting, and external input setting.
General system settings
Provides the following system setting options:
Time/Date
Press
[SYS] > {Setting} > {General} > {Time/Date} to set
the date and time of the analyzer.
The analyzer requires you to input the time in a
HHMMSS format, and the date in a YYYYMMDD
format.
Power Manager
Press
[SYS] > {Setting} > {General} > {Power manager} to
select a power saving mode from the followings. All
of the three modes provide choices for setting time
limit as 5 minutes, 15 minutes, 30 minutes or 4
hours.
• Backlight
The analyzer turns off the backlight of the
LCD screen at a pre- defined time limit. Press
any key to re- activate the backlight after the
backlight saving mode is triggered.
•
LCD
The analyzer turns off the LCD display at a
pre- defined time limit. Press any key to
re- activate the LCD display after the LCD
display saving mode is triggered.
•
Backlight & LCD
The analyzer turns off the both the LCD
display and the backlight at a pre- defined
time limit. Press any key to re- activate the
backlight and LCD display after the backlight
and LCD saving mode is triggered.