Show error – Agilent Technologies N9340A User Manual
Page 41
Advertising
System Setting
3
N9340A User’s Guide
39
Show Error
Accesses a list of the last 30 error messages
reported by the analyzer. The most recent error
will appear at the bottom of the list. The first
listed error will be removed firstly if the error list
is longer than 30 entries. When in remote control,
the error display will be halted with a specified
message at the bottom of the list when the error
list is longer than 30 entries.
Key Access: [SYS] > {More (2 of 3)} > {Show Error}
Advertising