RADWAG PS 510.R2.CT Carat Balance - Manual (Page 114)

- 114 -
18.7 Density of solids
Density of solids
is a function that allows the determination of the density of the
material determined for the reference mass sample.
Using this function entails the additional kit for determining density of solids and
liquids (optional equipment).
In order to assemble the density kit on the balance, remove the weighing pan and
anti-draft shield from the balance. In the place of the weighing pan assemble the
weighing pan with stand (1) and place beaker’s basis (2) on it.
The kit suitable for the PS balances with weighing pan 128x128 mm.
Components of the density kit:
1
Weighing pan with stand
7
Thermometer
2
Bottom weighing pan of density
determining kit for solids
8
Thermometer handle
3
Flexible connector
9
Sinker
4
Top weighing pan of density
determining kit for solids
10
Beaker basis
5
Beaker
11
Additional stand for set of pans or
a sinker
6
Hook
12
Additional set of pans for
determining density of solids,
which density is lower than density
of water