RADWAG PS 510.R2.CT Carat Balance - Manual (Page 19)

- 19 -
AS R.2 balances
AS balance with d=0.01/0.1 mg AS balance with d=0.1 mg
• open side doors of the weighing chamber,
• remove transport safety catch (1) – press the lock gently and turn it accordingly to
OPEN/CLOSE instruction, next remove the lock; please retain the lock should the
device be transported in the future,
• inside the weighing chamber place lower shield of the weighing chamber (2),
• put centering ring [framing facing downwards] (3),
• in the centre of centering ring assembly the weighing pan (4),
• put anti-draft shield in the chamber (5),
• close side doors of the weighing chamber,
• plug the balance to mains, pin of power adaptor should be connected to socket in
the back of balance housing.