RADWAG PS 510.R2.CT Carat Balance - Manual (Page 119)

- 119 -
8.
If <ANOTHER> liquid of determined density has been chosen, you should
insert its density
9.
After inserting this data, the program will pass on to the proper
measuring process,
10.
First, a mass sample should be placed on the top weighing pan of
the kit (weighing in the air), and after the indication stabilization the
result is approved
11. Next, a mass sample should be placed on the bottom pan of the kit
(mass determination in the liquid), and after the indication
stabilization, approve the result