RADWAG PS 510.R2.CT Carat Balance - Manual (Page 72)

- 72 -
• P5.3.4 PRODUCT
Enables printing out the name of the product that was weighed.
• P5.3.5 VARIABLE 1
Enables printing out the value of VARIABLE 1.
• P5.3.6 VARIABLE 2
Enables printing out the value of VARIABLE 2.
• P5.3.7 NETTO
Enables printing out net mass value in a basic unit (calibration unit).
• P5.3.8 TARE
Enables printing out the tare value in the current unit.
• P5.3.9 GROSS
Enables printing out the gross mass value in the current unit.
• P5.3.10 CURR. RES.
Enables printing out the current measurement result (NET mass) in the
current unit.
• P5.3.11 CAL. REPORT
Enables printing out a report from the last adjustment, according to the
settings declared for the adjustment report printout (see sec. 12.1 in this
manual).
• P5.3.12 NSTD. PRNT.
Enables printing out one of the four non-standard printouts on the header
printout.
You can choose one from the following options: NONE / NSTD. PRN 1 /
NSTD.PRN.2/NSTD.PRN. 3 / NSTD. PRN.4
The way of entering non-standard printouts is described further in this manual.
Example of a printout: