RADWAG PS 510.R2.CT Carat Balance - Manual (Page 97)

- 97 -
-
Number of pieces (on adding) on balance’s weighing pan must be less
than twice the amount of which was visible on the display before
adding parts
-
Current quantity of parts must be within the ± 0,3 tolerance of the total
value,
-
Measurement result has to be stabilised.
Procedure:
• Place the container on the pan and tare its mass,
• Press one of the F buttons, to which the function <ENTER SAMPLE>
is assigned, and the editing window <SAMPLE QUANTITY> is
displayed
• Use the navigating buttons or to select the correct
sample quantity.
• For the option: any quantity (displayed value <0000> enter a numer
using navigating buttons).
• Zatwierdzić wybraną liczność próbki, zostanie wyświetlony komunikat
<PLACExx PCS>.