2 return to weighing, 9 logging in, Return to weighing – RADWAG PS 510.R2.CT Carat Balance User Manual
Page 34: Logging in
- 34 -
P8 UNITS
P8.1 ACCESIBILITY
| declaration of units to be available for balance
operation
P8.2 START UNIT
| selection of a start unit, unit active on balance start-up
P8.3 USER UNIT U1
| parameter defining user’s unit 1
P8.4 USER UNIT U2
| parameter defining user’s unit 2
8.2
Return to weighing
CAUTION
Changes introduced in balance memory will be saved, when
abandoning the menu (on return to weighing).
Press ESC button several times.
9
LOGGING IN
In order to have full access to the user’s parameters and editing of database, the
person operating the balance, should log in as <ADMINISTRATOR> each time
they turn it on. The software enables the entry of 10 users with varying degrees of
authority.
The first login procedure
•
While in the main window select <LOG IN>,available by pressing
,
or by pressing one of the function buttons to which the shortcut <LOG
IN>
is assigned, or after pressing the button
, enter the users’
database and select the user <ADMIN>
•
After selecting the < ADMIN> button and confirming the choice by
pressing
, the program asks you to enter the user’s password,
•
You must enter „1111” and confirm by pressing
,
•
The program returns to the main window,
•
After the first login, you should first enter the users and assign the
appropriate access levels to them (procedures are described later in this
manual, see section 14
).