RADWAG PS 510.R2.CT Carat Balance - Manual (Page 95)

- 95 -
18.2 Counting parts of the same mass
The balance, in the standard version, is equipped with the option of counting
small objects of the same mass.
• Start Counting Pieces function
When the function is initiated for the first time, the standard mass equals
0.0000g. If the sample mass is determined and has been used in the mode
<COUNTING PIECES> then the software accepts the mass of recently used
standard as the standard mass.
18.2.1. Setup for mode COUNTING PIECES
The software allows entering settings for each working mode. Some the
settings are identical in all working modes. They are described in section
relating to the mode <WEIGHING>.
This section covers only the settings relating to the mode <COUNTING
PIECES
>.