4 additional display, 5 external buttons, Additional display – RADWAG PS 510.R2.CT Carat Balance User Manual
Page 154: External buttons
- 154 -
−
set the balance parameters related to the cooperation with the bar
code reader
<P4.3.1 PORT> - choice of the port, to which the bar code reader is
to be connected
o
accessible options: NONE, COM 1, COM 2
20.4
Additional display
The submenu <ADDITIONAL DISP.> includes the balance settings for
cooperation with the external additional display.
Procedure:
−
press
button
−
enter menu <P4 DEVICES>
−
and then enter in menu group<P4.4 ADDITIONAL DISP.>
−
set the balance parameters related to the cooperation with the
additional display
<P4.4.1 PORT> - choice of the port, to which the additional display
is to be connected
o
accessible options: none, COM 1, COM 2
CAUTION:
The balance cooperates with an additional display manufactured by
RADWAG.
Ensuring correct cooperation between the balance and the additional
display requires that the parameter of the baud rate value set to 115200
bit/s for the port to which the additional display is plugged.
20.5
External buttons
Submenu <EXTERNAL BUTTONS> contains the settings that enable the
balance to cooperate with external buttons: TARE and PRINT.
The procedure is following:
•
Press
•
Enter menu <P4 DEVICES>
•
Enter in the menu group <P4.5 EXTERNAL BUTTONS>
•
Activate the buttons
<P4.5.1. TARE> for <YES>