RADWAG PS 510.R2.CT Carat Balance - Manual (Page 82)

- 82 -
In order to remove a user should follow this procedure:
• Enter the user database – as in the description above
• Select the user that is to be removed from the list
• Press button
• The software shows <DELETE?> in the bottom line
• Confirm by pressing button
• When confirmed, the software removes the selected user from the list
• Return to the weighing mode
16.2 Products
PRODUCTS
– 1000 different products. The following data can be inserted for each
product: NAME (30 characters), CODE (6 characters), EAN (16 characters), MASS
(with the accuracy of balance reading unit), TARE (mass of the packaging relating
to a particular product with the accuracy of balance reading unit), MIN (low
threshold for the mode WEIGHING>, should be inserted with the accuracy of
balance reading unit), MAX (high threshold for the mode <CHECKWEIGHING>,
should be inserted with the accuracy of balance reading unit), TOLERANCE
(tolerance thresholds to [±] in mode <DOSING> entered as a % of the target mass).
In order to add a product, you should enter in the products database and add the
name of the product (follow the procedure as in the section above).
Next, insert the details about the product.