RADWAG PS 510.R2.CT Carat Balance - Manual (Page 17)

- 17 -
XA R.2 Balance
Steps:
-
open side doors of the weighing
chamber,
-
remove the transport protection
(6)
-
press the safety catch gently
and turn it accordingly to
<OPEN> instruction, next
remove the safety catch. Please
retain the safety catch should
the device be transported in the
future,
-
place bottom shield of the
drying chamber (5) inside
-
place centering ring (4) upon
the bottom shield,
-
assembly the weighing pan (1)
-
assembly anti-draft shield (1) or
(3),
-
close side doors of the weighing
chamber,
-
plug the balance to mains (pin
of power adaptor should be
connected to socket located in
the back of balance housing)
XA R.2.P Balance