RADWAG PS 510.R2.CT Carat Balance - Manual (Page 101)

- 101 -
VARIABLE 1
– function initiates the selection and editing of variable 1
VARIABLE 2
– function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.
18.3.1. Declaration of mass thresholds
Procedure:
• Press one of the F buttons, to which the function <ASSIGN
THRESHOLDS
>is assigned, the editing window is displayed and the
value of MIN low threshold can be ascribed. The ascribed value must
be given in a current unit.
• Use the arrow buttons to ascribe the value of the low threshold