RADWAG PS 510.R2.CT Carat Balance - Manual (Page 104)

- 104 -
VARIABLE 2
– function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.
18.4.1. Setting a target weight by entering values
Procedure:
• Press one of the F buttons, to which the function <ENTER SAMPLE>
is assigned, and the editing window <ENTER SAMPLE> is displayed.
The threshold value shall be given in the current unit.
• Use the arrow buttons to enter the target weight
• Confirm the inserted target weight by pressing button,
• The software automatically sets tolerance of target mass dosing.