RADWAG PS 510.R2.CT Carat Balance - Manual (Page 111)

- 111 -
18.6.2. Method of operation to manually start the process
To manually start the process of weighing select the option <AUTOSTART> and
<NO> in the mode settings.
Procedure:
After altering the setting, return to the main window by pressing button
repeatedly.
Next, set the averaging time in seconds. It is the time, during which the balance
software collects measurements and based on these measurements the average
result is determined.
The parameter <THRESHOLD> is not required for this measurement mode.
Select the mode <ANIMAL WEIGHING>.