RADWAG PS 510.R2.CT Carat Balance - Manual (Page 133)

- 133 -
18.10.2. Returning to the weighing mode
18.11 Peak hold
This function enables peak hold applied to the weighing pan during a single
checkweighing process. Apart from standard settings for this mode (described
in the weighing mode), additional setting has been introduced.
The option is available in the settings for mode <PEAK HOLD>
This is:
• THRESHOLD – which specifies the starting control point of peak hold on
the weighing pan by the balance software. It should be remembered,
however, that the peak hold must be set according to the needs before
starting the weighing process
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <PEAK HOLD> the following options are available, which a
user can assign to each of the F buttons:
NONE
– no function assigned to the button
SELECT PRODUCT
– function initiates the option of selecting a product
from product database
LOG IN
– function initiates the option of selecting and logging-in of a
balance’s user