RADWAG PS 510.R2.CT Carat Balance - Manual (Page 145)

- 145 -
19.3. USB port
USB port of type A is intended for
:
• Connecting a memory stick storing <FAT files system>,
• Connecting balance to PCL printer,
• Connecting EPSON TM-T20 printer to USB port
Memory stick may be used for export/import of data stored in balances, or for
carring out measurement data print-out (set parameter P4.2.1
<DEVICES/PRINTER/PORT> to <PENDRIVE> option). Measurement data print-
out operation is described in section 17.3 of this manual.
Please remember that for PCL printer the drivers print completetly filled page, i.e.
the page will be printed only upon pressing PRINT button, located on a balance, for
several times (it depends on a printout size how many times the PRINT button shall
be pressed prior print-out).
It is possible to obtain print-out upon pressing PRINT button once only, supposing
that control code <0C> has been set as SUFIX (for description of this function go to
section 20.2 Printer
).
USB port of type B is intended for:
• Connecting balance to a PC computer
In order to make connection of balance and computer possible it is necessary to
install virtual COM port in a computer.
To carry out this procedure the user needs a respective driver installer which may
be either downloaded from www.radwag.com website or taken from a CD with
manuals.
The demanded driver installer is:
R SERIES RADWAG USB DRIVER x.x.x.exe
In course of installation the user shall be given a number which the balance will
interpret as COM port number.