RADWAG PS 510.R2.CT Carat Balance - Manual (Page 153)

- 153 -
SUFFIX - 1D564108 (paper crop for EPSON printers equipped with an
auto cutter blade)
Example balance settings for correct cooperation (printout of polish signs) with TM-
T20
EPSON termal printer connected to RS232 port; if the printer is connected to
USB port than the transmission speed setttings and parity do not matter:
Communication parameters of port to which the printer is connected:
• BAUDRATE - 38400 bit-s
• PARITY – none
Printer parameters for a PERIPHERALS group:
• PORT – COM1 or COM2 (the one to which the printer is
connected)
• PREFIX - 1B742D (1250 code page)
• SUFFIX - 1D564108 (paper crop for EPSON printers equipped
with an auto cutter blade)
If on the printout in the place of the last digit there are any unexpected signs (for
verified balances), than <P4.2.2 PREFIX> parameter should incorporate, apart
from code page, code of the UK signs chart: 1B5203. In such a case the <P4.2.2
PREFIX> parameter setting should be as follows:
• PREFIX - 1B742D (1250 code page and UK signs chart)
Control codes for example code pages:
Control code Page or other command
1B742D code page 1250
1B7410 code page 1252
1B7430 Code page 1254
1B5203 UK signs chart
1B5202 DE signs chart
1D564108 Paper crop
0C Form feed (for PCL printers)
20.3 Bar code reader
The submenu <BAR CODE READER> includes the balance settings for
cooperation with the bar code reader.
Procedure:
− press button
− enter the menu <P4 DEVICES>
− and then enter in menu group <P4.3 BAR CODE READER>